CCD or CMOS Rear View Camera Video Parking Sensor, with TFT LCD Monitor

 

Model Number: CA7000

Key Specifications:

• Universal features, easy to install
• Four ultrasonic sensors detect distance and orientation
• Low illumination, wide angle CCD/CMOS camera
• Camera with adjustable viewing angle
• Distance, orientation and rear image shows on monitor
• The sensors aid detecting potential back obstacles and enable accurate distance measurement to make reversing safe and convenient
• Distance to obstacles is indicated by numeric display, and speaker sound
• Orientation indication
• Good-quality PC + ABS housing
• Auto-detecting and auto-alarming mechanism, a beep indicated when turns to reverse gear
• Acoustic signal increases in frequency when obstacles move closer within 1.50m
• 3-stage progressive buzzer sound to prevent bumping:
  • 1.5 to 1.0m: long interval Bi.Bi.Bi., safe reversing
  • 1.0 to 0.5m: short interval Bi.Bi.Bi, more harsher when closed, slow reversing
  • 0.5 to 0.3m continuous Bi, stop reversing
  • Professionally made, quality guaranteed
• Ultrasonic sensor specifications:
  • Frequency: 40kH MHz
  • Detecting distance: 2.0 to 0.3m
  • Numeric display from 2.00 to 0.3m
  • Voltage: DC 12V, +/-2V
  • Current consumption: 100mA (maximum)
  • Operating temperature: -30 to +80 degrees Celsius
  • Sensors: 4
  • Sensor type: built-in 22mm
  • Sensor color: black (standard)
• Monitor specifications:
  • 7-inch TFT-LCD monitor, touch screen
  • System can switch automatically while reversing, this optical parking system can be used as car parking sensor
  • The monitor with special blue lens, can be acted as a normal rear view when power-off
  • Way of operation: keystroke button/remote controller
  • Resolution: 480 x 234 pixels
  • Excellent picture effect available even in strong sunlight to make safe driving
  • Delicate design could perfectly match your noble car
  • High quality parts used can well free from high frequency interference from motor
  • Cables of high quality and super brightness backlight is used to improve clearness and longer usage
  • ABS plastic and painting can free from scratching and alcoholic erosion
  • Easy to install on the car without worrying about damaging your car
  • Installation: clip it on the original mirror
• Camera specifications:
  • Image sensor: 1/4-inch CCD/CMOS color image sensor
  • 170 degrees wide view angle
  • Illumination: 0.5lux
  • Auto white balance
  • Auto backlight compensation
  • Video output: 1.0Vp to p/75
  • Pixels (H x V): 640 x 480
  • Scanning system: 30fps AT 27MHz
  • Image reverse: left-right mirror
  • Water-resistant aluminum housing